Synthesis of Novel Isoindolo[2,1‐a]quinazolinedione Derivatives Containing a 1,2,3‐Triazole Ring System

A synthesis of isoindolo[2,1‐a]quinazolinedione derivatives, coupled with a 1,2,3‐triazole ring system, via the reaction of isatoic anhydride, HC?CCH₂NH₂, and 2‐formylbenzoic acid is described, which led to the formation of the isoindolo[2,1‐a]quinazoline‐5,11‐dione scaffold having a C?C bond that participated in a click reaction with various organic azides.     

A facile and efficient [bmim]N3 catalyzed direct oxidative esterification of arylaldehydes with alcohols

Task-specific ionic liquid, [bmim]N₃ was used as an effective catalyst and reaction medium for the direct oxidative esterification of arylaldehydes with alcohols. The oxidative esterification reaction of a variety of arylaldehydes took place smoothly with some primary and secondary alcohols in [bmim]N₃. Satisfactory results were obtained with arylaldehydes containing electron withdrawing groups. Tertiary alcohols did not react under these conditions.     

Synthesis and characterization of radiation grafted films for removal of arsenic and some heavy metals from contaminated water

Grafting of styrene/maleic anhydride and methyl methacrylate/maleic anhydride binary monomers onto the low density polyethylene film was performed using the γ-ray irradiation technique. Then, the synthesized grafted films were treated with different ammonia derivatives for developing chelating functionalization. These chelating products were characterized by the gravimetric method as well as by the Fourier transformed infrared spectroscopic method, and were used for removal of arsenic and some heavy metals from aqueous solutions. The optimum absorbed dose of 30 kGy reveals the graft yielding of about 325% in the films. Uptake of arsenic and some heavy-metal ions (Cr(III), Mn(II), Fe(III), Ni(II), Cu(II) and Pb(II)) from contaminated water by the chelating functionalized films (CFF) was examined by an atomic absorption spectrophotometer. The maximum arsenic removal capacity of 5062 mg/kg has been observed for the film treated with hydroxylamine hydrochloride. The CFF prepared by semicarbazide and thiol analogs show affinity toward the metal ions with an order: Cu(II)>Fe(III)>Mn(II) etc. The results obtained from this study indicate that the functionalized films show good chelating and ion-exchange property for metal ions.     

Synthesis and Crystal Structure of 3-（4-Bromobenzyloxy）-6-morpholinopyridazine

The title compound 3-(4-bromobenzyloxy)-6-morpholinopyridazine(C15H16BrN3O2) was synthesized,and its crystal structure was studied.It crystallizes in the triclinic system,space group P with a = 8.3408(17),b = 8.8620(18),c = 10.832(2) ,α = 108.09(3),β = 91.28(3),γ = 100.90(3)°,Dc = 1.562 g/cm3,Z = 2,λ = 0.71073 ,μ(MoKα) = 2.769 mm-1,Mr = 350.22,V = 744.5(3) 3,F(000) = 356,the final R = 0.0522 and wR = 0.1366 for 2016 observed reflections with I > 2σ(I).In the crystal structure,the morpholine ring adopts a chair conformation with O(2) and N(3) atoms at the flap positions-0.656(7) and 0.622(6)  out of the mean plane formed by the other four C atoms,respectively.These molecules generate centro-symmetric dimers through intermolecular π-π interaction.     

Synthesis of 2,3-diaryl-5H-imidazo[2,1-a]isoindol-5-ones via the one-pot reaction of 1,2-diketones, 2-formylbenzoic acids, and ammonium acetate

We describe a new one-pot synthesis of 2,3-diaryl-5H-imidazo[2,1-a]isoindol-5-ones via the reaction of 1,2-diketones, 2-formylbenzoic acids, and ammonium acetate in acetic acid under reflux conditions and in the absence of a catalyst.     

A green one-pot synthesis of N-alkyl-2-(2-oxoazepan-1-yl)-2-arylacetamide derivatives via an Ugi four-center,three-component reaction in water

This work describes a green and efficient one-pot synthesis of N-alkyl-2-(2-oxoazepan-1-yl)-2-arylacetamide derivatives via an Ugi four-center, three-component reaction of 6-aminohexanoic acid, aromatic aldehydes, and isocyanide derivatives in water under reflux conditions in the absence of a catalyst.     

Synthesis of 4‐phenylbutyl‐branched polyethylene from an ethylene‐styrene feed by a half‐titanocene catalyst

Copolymerization of ethylene and styrene with the catalytic system Cp*TiMe₃‐B(C₆F₅)₃ under suitable conditions affords a new polymer having a polyethylenic backbone with 4‐phenyl‐1‐butyl branches as the main product. This unexpected result has been ascribed to the multi‐site nature of the catalytic system, containing a species able to co‐oligomerize ethylene and styrene to 6‐phenyl‐1‐hexene (which was actually identified in the polymerization mixture), and another species able to copolymerize the latter with ethylene.     

Sheath-assisted focusing of microparticles on lab-on-a-chip platforms

Lab-on-a-chip (LOC) technologies can take advantage of sheath flows for particle/cell focusing before sensing or sorting. The integration of focusing with other microscale manipulation techniques (e.g., sorting) creates a trade-off between the throughput of the device and its performance. Therefore, exploring the effective parameters for cells/particles focusing enables us to improve the desired output of LOC devices. A common configuration for sheath-assisted focusing is Y junctions, which are parametrically studied in this paper. First, a computational model was developed and validated by comparing it with our experimental results. Using COMSOL Multiphysics modeling, the effects of multiple parameters were studied. These parameters include the sheath flow ratio (sheath flow over total flow), width ratio (width of the sheath inlet over the total width), junction angles, and particle size on the focusing width and the distribution of the particles within the focusing region. Then, the numerical data were used to develop two generalized linear models to predict the focusing width of the particles and the standard deviation of the position of the particles. The results showed that the focusing width is greatly impacted by the sheath flow rate ratio. Further, the standard deviation of the position of the particles, which represents the concentration of the particles, is mostly dependent on the flow rate ratio, width ratio, and particle size. Our results provide a better understanding of how the device geometrical and operational factors affect the position of the particles in the development of high-performance on-chip sensing and sorting of both cells and particles.     

On the Degeneration, Regeneration and Braid Monodromy of T×T

This paper is the first in a series of three papers concerning the surface T×T. Here we study the degeneration of T×T and the regeneration of its degenerated object. We also study the braid monodromy and its regeneration.     

Preparation and properties of novel soluble aromatic polyimides from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing triphenylamine unit were prepared by two different methods, i.e., a conventional two-step method starting from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides and the one-step thioanhydride method starting from the aromatic diamine and aromatic tetracarboxylic dithioanhydrides. Both procedures yielded high-molecular-weight polyimides with inherent viscosities of 0.47–1.17 dL/g. Some of these polymers were soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, m-cresol, and pyridine. All the polyimides afforded transparent, flexible, and tough films, and the color varied from pale yellow to dark red, depending markedly on the tetracarboxylic acid components. The glass transition temperatures (T_gs) of these polyimides were in the range of 287–331°C and the 10% weight loss temperatures were above 520°C in air. The polyimides prepared by the one-step method exhibited better solubility in organic solvents and had somewhat lower T_gs than the polymers prepared by a conventional two-step method.